How does the Rapid Removal Hub Work?

Let me tell you about our amazing Rapid Removal Hub – it's a game-changer when it comes to easily removing our Sistaco Mineral Bond powder.

Here's the lowdown on how it works:

1. Start by removing the top cover of the Rapid Removal Hub.

2. Pop the vessel provided into the well of the Hub and pour in 10 to 15ml of 100% acetone.

3. Gently file the top coat of your nails to break the surface.

4. Flip on the red switch, which you'll find on the base. Once it's on, you'll see the H light come on first, followed by the S light after 90 seconds. That's your cue to insert your fingers into the top of the system. Feel free to relax – you might notice your fingers warming up a bit, but just make sure they're not too low to avoid any burns.

5. After 3 minutes, take your fingers out and immediately use our trusty Sistaco 3-in-1 Tool to push the shade off your nails. Repeat this step as needed.

6. Don't forget about your other hand – give it the same treatment!

7. After a total of 6 minutes, you'll see the light switch to W, indicating that the Rapid Removal Hub is cooling down.

8. And last but not least, always remember to switch off and unplug your device when you're done using it.

That's it – easy peasy! Our Rapid Removal Hub makes saying goodbye to your shade effortless.