Wondering if your Rapid Removal Hub is heating up properly? Here's a quick test you can try:
1. Remove the inner bowl where you'd usually pour your Acetone. You'll see a metal base dish underneath.
2. Fill about three-quarters of this dish with water.
3. Turn on your device and wait for the water to heat up. It might take a little time, but keep an eye out for tiny bubbles forming at the bottom of the dish.
4. Even if you don't see steam, if the water gets hot, your device is doing its job just fine.
5. Once you've checked, turn off the device, unplug it, and wait for the water to cool down before you remove and clean the dish.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article